Fax Destination

E Select the name whose fax desti- nation you want to register.

Press the name key, or enter the registered number using the number keys.

Note

If you press, you can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax desti- nation.

To register the name, key dis- play, and title, see p.72 “Regis- tering Names”.

F Press [Fax Dest.].

G Enter the fax number using the number keys, and then press [OK] under Facsimile No..

To select the line

APress [Select Line].

B Select the line, and then press [OK].

To program the SUB Code

A Press [Adv. Features], and then select [SUB Code].

B Press [Change] under TX SUB

Code.

C Enter a SUB Code using the number keys, and then press [OK].

D To enter a password, press [Change] under Password (SID).

E Enter a password using the number keys, and then press [OK].

FPress [OK].

To program the SEP Code

A Press [Adv. Features], and then select [SEP Code].

B Press [Change] under RX SEP

Code.

5

C Enter a SEP Code using the number keys, and then press [OK].

D To enter a password, press [Change] under Password (PWD).

E Enter a password using the number keys, and then press [OK].

FPress [OK].

To set the International TX Mode

A Press [Change] under Interna- tional TX Mode.

B Select [Off] or [On], and then press [OK].

To select the fax header

Note

You can register the fax header in Program Fax Information in the system settings for Facsimi- le Features. See “Program- ming”, Facsimile Reference <Basic Features>.

81

Page 93
Image 93
Lanier LD230, LD225 To select the line, To program the SUB Code, To program the SEP Code, To set the International TX Mode