Lanier LD230, LD225 Changing a User Code, To change the available functions, H Press TNext twice

Authentication Information

G Enter the user code using the number keys, and then press [#].

Note

❒If you make a mistake, press

[Clear] or the {Clear/Stop} key, and then enter the code again.

H Press [TNext] twice.

I Select the functions to be used with the user code from Available Functions.

J Press [OK].

Note

❒To continue registering user codes, repeat the procedure from step E.

K Press [Exit].

L Press the {User Tools/Counter}key.

Changing a User Code

Note

❒Even if you change a user code, the counter value will not be cleared.

A Press the {User Tools/Counter}key.

B Press [System Settings].

C Press [Administrator Tools], and then press [TNext].

D Press [Address Book Management].

E Select the user whose user code you want to change.

Press the name key, or enter the registered number using the number keys

Note

❒ If you press , you can search for a user by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.

❒ To change the name, key dis- play and title, see p.73 “Chang- ing a Registered Name”.

F Press [Auth. Info].5

G Press [Change], and then enter the new user code using the number keys

H Press [#].

To change the available functions

APress [TNext] twice.

BPress the key to select the func- tions to enable them.

Note

❒Press the key to highlight it, and then the function is ena- bled. To cancel a selection, press the highlighted key.

I Press [OK].

J Press [Exit].

K Press the {User Tools/Counter}key.

75