Lanier LD225 Paper Tray, Changing the Paper Size of the, E While pressing the release lever

Troubleshooting

Changing the Paper Size

Preparation D Release the side lever.

	Be sure to select the paper size
	with User Tools and the paper size
	selector. If you do not, misfeeds
	might occur. See p.56 “Tray Paper
	Size: Tray 1–4”.
	Important
	❒ If you want to change the paper
	size set in the LCT, contact your
	service representative.	ZEWY160E
	Reference	E While pressing the release lever,
	For details about paper sizes and	adjust the side guides.
	types, see p.162 “Copy Paper”.
6	Changing the Paper Size of the
	Paper Tray
	A Make sure the paper tray is not in
	use. Then, pull the paper tray out
	slowly.	ZEWY170E

B If paper is loaded in the tray, re- move it.

C While pressing the release lever, adjust the back guide.

ZEWY150E

F Square the paper, and then load it in the tray with the copying face up.

ZEWY180E

Important

❒Do not stack paper over the lim- it mark.

❒Make sure the paper stack is flush against the right side guide.

132