Lanier LD230 Settings You Can Change with User Tools, General Features, Panel Tone, Reference

Settings You Can Change with User Tools

Settings You Can Change with User Tools

Reference

To access User Tools, see p.52 “Accessing User Tools (System Settings)”.

General Features

❖ Panel Tone

The beeper (key tone) sounds when a key is pressed.

Note

❒ Default: On

4

❖Warm Up Notice (copier/Document Server)

You can have the beeper sound when the machine becomes ready to copy af- ter leaving Energy Saver mode, or when the power is turned on.

Note

❒If the Panel Tone setting is “OFF”, the beeper does not sound, whatever the Warm Up Notice setting.

❒Default: On

❖Copy Count Display (copier/Document Server)

The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down).

Note

❒Default: Up (count up)

❖Function Priority

You can specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.

Note

❒Default: Copier

❖Print Priority

Print Priority is given to the mode selected.

Reference

p.31 “Multi-Access”

Note

❒Default: Display Mode

❒When [Interleave] is selected, the current print job will be interrupted after a maximum of five sheets.

53