Lanier LD225 Interrupt key copier/scanner mode, Main power indicator and On indicator, Features

Getting Started

9.{Interrupt} key (copier/scanner mode)

	Press to make interrupt copies during
1	copying or scanning. See “Interrupt
	Copy”, Copy Reference.

10.Main power indicator and On indicator

The main power indicator goes on when you turn on the main power switch. The On indicator lights when the power is on.

Important

❒Do not turn off the main power switch while the power indicator is lit or blinking. Doing so may dam- age the hard disk.

11.Operation switch

Press to turn the power on (the On indi- cator goes on). To turn the power off, press again (the On indicator goes off).

12.{Sample Copy}key

Press to make a single set of copies or prints to check print quality before mak- ing multiple sets.

17.{Start Manual RX}key, {On Hook Di- al} key, {Pause/Redial} key, and {Tone}key

Reference

Facsimile Reference <Basic Features>

and Facsimile Reference <Advanced

Features>

18.Function keys

Press to select one of the following func- tions:

•Copy:

•Document Server:

•Facsimile:

•Printer:

•Scanner:

19.Function status indicators.

These show the status of the above func- tions:

•Yellow: selected.

•Green: active.

•Red: interrupted.

13.{Start}key

Press to start copying. Start scanning or printing documents stored using the Document Server function.

14.{Clear/Stop}key

•Clear

Press to delete a number entered.

•Stop

Press to stop a job in progress, such as scanning, faxing, or printing.

15.{#}key

Press to enter after a numerical value.

16.Number keys

Use to enter the numbers for copies, fax numbers and data for the selected func- tion.

22