Lanier LD230, LD225 manual Saving Energy, Energy Saver Mode, Auto Off

Turning On the Power

Saving Energy

-Energy Saver Mode

If you do not use the machine for a certain period after an operation, or when you press the {Energy Saver} key, the display disappears and the machine goes into Energy Saver mode. When you press the {Energy Saver}key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode.

Note

❒You can change the amount of time the machine waits before switch- ing to Energy Saver mode after copying has finished or the last op- eration is performed. See p.60 “Panel Off Timer”.

-Auto Off

The machine automatically turns it-

self off when the job is finished, after 1 a certain period of time has elapsed.

This function is called "Auto Off".

Note

❒You can change the Auto Off time. See p.59 “Auto Off Timer”.

❒The Auto Off Timer function will not operate in the following cases:

•When a warning message ap- pears

•When the service call message appears

•When paper is jammed

•When the cover is open

•When the "Add Toner" message appears

•When toner is being replenished

•When the User Tools/Counter screen is displayed

•When fixed warm-up is in progress

•When the facsimile, printer, or other functions are active

•When operations were sus- pended during printing

•When the handset is in use

•When the On-hook dialing function is in use

•When a recipient is being regis- tered in the address list or group dial list

•When the Data In indicator is on or blinking

•When the screen of stored docu- ment under the printer function is displayed

27