Lanier LD230, LD225 manual Multi-Access, Function Compatibility

Multi-Access

Multi-Access

You can carry out another job using a different function while the current job is being performed. Performing multiple functions simultaneously like this is called "Multi-accessing".

This allows you to handle jobs efficiently, regardless of how the machine is being	2
used. For example:

•While making copies, you can scan documents to store in the Document Server.

•While printing documents stored in the Document Server, the machine can receive print data.

•You can make copies while receiving fax data.

•While printing print data, you can make operations for copying.

Note

❒See p.53 “Print Priority” for setting function priority. As default, [Display Mode] is set to first priority.

❒When the Internal Tray 2 (1 bin tray), Shift Sort Tray, 500–sheet finisher, or 1000–sheet finisher is installed on the machine, you can specify the output tray where documents are delivered. For details about how to specify the out- put tray for each function, see the following descriptions:

•p.54 “Output: Copier (copier)”

•p.55 “Output: Document Server (Document Server)”

•p.55 “Output: Facsimile (facsimile)”

•p.55 “Output: Printer (printer)”

-Function Compatibility

The chart shows Function Compatibility when print priority is set to "Inter- leave". See p.53 “Print Priority”.

: Simultaneous operations are possible.

$: Operation is enabled when the relevant function key is pressed and remote switching (of the scanner) is done.

❍: Operation is enabled when the {Interrupt}key is pressed to interrupt the pre- ceding operation.

→: Operation is performed automatically once the preceding operation ends.

×: The operation must be started once the preceding operation ends. (Simultane- ous operations are not possible.)

31