1.Read the safety information that begins on page vii and “Installation guidelines” on page 33.
2.Turn off the server and peripheral devices and disconnect all power cords and external cables.
3.Slide the server out of the rack.
4.Remove the cover (see “Removing the cover” on page 37).
5.If
6.Remove the air baffle over the DIMMs (see “Removing the DIMM air baffle” on page 52).
Attention: To avoid breaking the retaining clips or damaging the DIMM connectors, open and close the clips gently.
7.Open the retaining clip 2 on each end of the DIMM connector and lift the DIMM 1 from the connector.
8.If you are instructed to return the DIMM, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Chapter 5. Installing optional devices and replacing customer replaceable units 63
