Lenovo 3797 manual Installing a tape drive

6.Pull the drive completely out of the bay.

7.Remove the tape drive
1 from the drive tray
2 by removing the four screws on the sides of the tray.

8.If you are not installing another drive in the bay, insert the tape drive filler panel into the empty tape drive bay.

9.If you are instructed to return the drive, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Installing a tape drive

1 SAS riser card

To install a tape drive, complete the following steps:

1.If the tape drive came with metal spacers on the installed on the sides, remove the spacers.

2.Install the drive tray on the new tape drive as shown, using the four screws that you removed from the former drive.

Chapter 5. Installing optional devices and replacing customer replaceable units 91