Lenovo 3797 Installing the full-length-adapter bracket, Storing the full-length-adapter bracket

Installing the full-length-adapter bracket

If you are installing a full-length adapter in the upper riser-card PCI slot, you must first install the full-length-adapter bracket in the end of the riser-card assembly.

To install the full-length-adapter bracket, complete the following steps:

1.Orient the riser-card assembly as shown.

2.Remove the full-length-adapter bracket from the storage location.

a.Press the bracket tab
3 and slide the bracket toward the end of the riser-card assembly.

b.Push the bracket out of the storage location on the riser-card assembly.

3.Align the bracket with the end of the riser-card assembly as shown.

4.Place the two hooks
1 in the two openings
2 in the end of the riser-card assembly.

5.Press the bracket tab
3 and slide the bracket to the right until it clicks into place.

6.Return to the adapter-installation instructions.

Storing the full-length-adapter bracket

If you are removing a full-length adapter in the upper riser-card PCI slot and will replace it with a shorter adapter or no adapter, you must remove the full-length-adapter bracket from the end of the riser-card assembly and return the bracket to its storage location.

To remove and store the full-length-adapter bracket, complete the following steps:

1.Press the bracket tab
3 and slide the bracket to the left until the bracket falls free of the riser-card assembly.

2.Align the bracket with the storage location on the riser-card assembly as shown.

3.Place the two hooks
1 in the two openings
2 in the storage location on the riser-card assembly.

60ThinkServer RD220 Types 3729, 3779, 3797, and 3798: Installation and User Guide