Removing a CD-RW/DVD drive
To remove the
1.Read the safety information that begins on page vii and “Installation guidelines” on page 33.
2.Turn off the server and peripheral devices and disconnect all power cords and external cables.
3.Slide the server out of the rack; then, remove the cover (see “Removing the cover” on page 37).
4.Press the release tab down 1 to release the drive; then, while you press the tab, push the drive toward the front of the server.
5.From the front of the server, pull the drive out of the bay 2.
6.Remove the drive retention clip 1 from the drive (held with alignment pins
2).
7.If you are instructed to return the
Chapter 5. Installing optional devices and replacing customer replaceable units 89
