Lenovo 3797 manual RAID controller

1	RAID controller
2	Retention bracket
3	SAS riser card

5.Remove the retention bracket from the current location:

a.Pinch the bottoms of both bracket posts and push the posts up out of the SAS riser-card assembly.

b.Rotate the bracket
2 to free the bracket tab from the slot on the SAS riser-card assembly
1.

6.Install the retention bracket in the new location on the SAS riser-card assembly:

a.Insert the bracket tab
2 into the slot on the SAS riser-card assembly
1.

b.Rotate the bracket so that the bracket posts align with the holes in the SAS riser-card assembly.

c.Press the posts through the holes in the SAS riser-card assembly until they click into place.

Chapter 5. Installing optional devices and replacing customer replaceable units 83