–System board Ethernet 2 PXE (fixed)
–System board SAS (or RAID)
The following illustration shows the adapter connectors on the PCI
1 | Adapter |
2 | PCI |
3 | Adapter connectors |
To install a PCI adapter, complete the following steps:
1.Read the safety information that begins on page vii and “Installation guidelines” on page 33.
2.Turn off the server and peripheral devices and disconnect all power cords and external cables (see “Turning off the server” on page 31).
3.Remove the cover (see “Removing the cover” on page 37).
4.Determine which expansion slot you will use for the adapter.
5.If you are installing an adapter in PCI expansion slot 1 or 2, remove PCI
6.Slide the
1 | Adapter |
2 | Expansion slot cover |
3 | PCI |
7.Install the adapter:
a.If the adapter is a
Chapter 5. Installing optional devices and replacing customer replaceable units 57
