Lenovo 3797 manual Removing the SAS riser card and controller assembly, Drive-capable server model

Removing the SAS riser card and controller assembly

To remove the SAS riser-card and controller assembly from the server, complete the steps for the applicable server model.

v12-drive-capable server model:

1 SAS riser card

2 SAS controller

3 Release tab

1.Press the assembly release latch toward the rear of the server and lift that end of the SAS controller assembly a little. Place your fingers underneath the upper portion of the SAS riser card and lift the assembly from the system board.

2.Lift the assembly out of the server.

Chapter 5. Installing optional devices and replacing customer replaceable units 77