Lenovo 3797 manual Lan

vParity checking on the small computer system interface (SCSI) bus and PCI buses

vPower management: Compliance with Advanced Configuration and Power Interface (ACPI)

vPower-on self-test (POST)

vHardware Failure Protection alerts on memory, microprocessors, SCSI hard disk drives, fans, and power supplies

vRedundant hot-swap power supplies and redundant hot-swap fans (some models)

vRedundant Network Interface Card (NIC) support

vRemind button to temporarily turn off the system-error LED

vRemote system problem-determination support

vROM-based diagnostics

vROM checksums

vSerial Presence Detection (SPD) on memory, VPD, power supply, and hard disk drives backplane

vSingle-DIMM isolation of excessive correctable error or multi-bit error by the Unified Extensible Firmware Interface (UEFI- (formerly called BIOS))

vStandby voltage for system-management features and monitoring

vStartup (boot) from LAN through remote initial program load (RIPL) or dynamic host configuration protocol/boot protocol (DHCP/BOOTP)

vSystem auto- from the configuration menu

vSystem-error logging (POST and IMM)

vSystem-management monitoring through the Inter IC protocol

vUpgradeable POST, Unified Extensible Firmware Interface (UEFI), diagnostics, IMM firmware, and read-only memory (ROM) resident code, locally or over the

LAN

vVital product data (VPD) on microprocessors, system board, power supplies, SAS/SATA (hot-swap-drive) backplane, and power backplane

Chapter 3. What is included with your server 13