Lucent Technologies 555-230-128 manual Feature Access Code FAC screen page 1 appears

DEFINITY Enterprise Communications Server Release 6	Issue 3
Installation and Test for Compact Modular Cabinets 555-230-128	May 1998

1Install and Cable the Cabinets

CAMA/E911 Installation Page 1-72

11.The Feature Access Code (FAC) screen (page 1) appears.

12.In the Auto Route Selection (ARS) Access Code 1: field, administer the ARS access code (in the example above, type 9) and press Enter (must match dial plan).

13.At the prompt, enter change ars analysis <9> and press Enter.

		ARS	DIGIT		ANALYSIS TABLE
		Partitioned			Group Number: _	Percent		Full:	___
Dialed	Total	Rte Call Nd		ANI	Dialed	Total	Rte	Call Nd ANI
String	Mn Mx	Pat Type Num		Rq	String	Mn Mx	Pat	Type Num Rq
9________________ 7_ 7_		2__ hnpa	___	n	__________________ __ __ ___			____ ___ _
976______________ 7_ 7_		den hnpa	___	n	__________________ __ __ ___			____ ___ _
11_______________ 2_ 2_		11_ emer	___	n	__________________ __ __ ___			____ ___ _
911______________ 3_ 3_		12_ emer	___	n	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _
_________________ __ __		___ ____	___	_	__________________ __ __ ___			____ ___ _

Screen 1-8. ARS Digit Analysis Table

14.On ARS Digit Analysis Table screen appears. In the Dialed String field, in the first empty row, enter 11.

15.In the Total Mn field, enter 2.

16.In the Total Mx field, enter 2.

17.In the Rte Pat field, enter the desired Route Pattern (in the example above the route pattern is 11).

NOTE:

For the following step, if you are using the Attendant Crisis Alerting feature, type alrt instead of “emer.”

18.In Call Type field, enter emer.

19.On the next empty row, in the Dialed String field, type 911.

20.In the Total Mn field, enter 3.

21.In the Total Mx field, enter 3.