Lucent Technologies 555-230-128 manual Screen 1-10. Route Pattern form

DEFINITY Enterprise Communications Server Release 6	Issue 3
Installation and Test for Compact Modular Cabinets 555-230-128	May 1998

1Install and Cable the Cabinets

CAMA/E911 Installation Page 1-74

28.At the prompt, type change route-pattern<number> (the route pattern to be changed; in the example below, the route pattern is 12) and press Enter.

									Page 1 of X
						Pattern Number: 12
Grp.	FRL NPA		Pfx Hop		Toll No. Del			Inserted		IXC
No.			Mrk Lmt		List Digits			Digits
1: 1__	0	___	_	__	__	1_		____________________________________ user
2: ___	_	___	_	__	__	__		____________________________________ user
3: ___	_	___	_	__	__	__		____________________________________ user
4: ___	_	___	_	__	__	__		____________________________________ user
5: ___	_	___	_	__	__	__		____________________________________ user
6: ___	_	___	_	__	__	__		____________________________________ user
BCC	VALUE		TSC	CA-TSC		ITC	BCIE Service/Feature		Numbering	LAR
0 1	2 3	4 W		Request					Format
1: y y y y y n			y none_____			both	ept	outwats-bnd____ BAND: ___ ________		none
2: y y y y y n			n			rest		_______________	________	next
3: y y y y y n			n			rest		_______________	________	rehu
4: y y y y y n			n			rest		_______________	________	none
5: y y y y y n			n			rest		_______________	________	none
6: y y y y y n			n			rest		_______________	________	none

Screen 1-10. Route Pattern form (Page 1)

29.On the Route Pattern screen, in Grp. No. field, type the CAMA trunk group number and press Enter.

30.In the FRL field, type 0.

NOTE:

For the following step, if the Central Office (CO) wants KP911ST as the dialed digit string, then leave blank. If the CO wants KP11ST, then delete one digit.

31.Administer No. Del Digits field if needed and press Enter.

32.At the prompt, type change cama-numberingand press Enter.