Cordless Devices
Overview
Note: The cordless devices are supported by the 5330e/5340e IP Phones only. The 5320e IP Phone does not support a cordless module or cordless devices.
You can use the cordless handset and cordless headset to move around within your office or adjacent offices. The cordless headset and handset are optional accessories, ordered separately. For more information, contact your system administrator or local Mitel provider. Both cordless devices connect to your IP phone through the cordless module, which attaches to the back of the IP phone. The cordless headset rests and recharges in a headset cradle that attaches to the side of the IP phone. The cordless handset recharges in the handset cradle.
The Cordless Devices Application provides access to the configuration settings and information screens that apply to the cordless module and accessories. For more information, see “Pairing the Cordless Module and Devices” on page 99.
The cordless module is shown here. The IP phone features are explained below.
| Feature | Function |
|
|
|
1 | – Cordless Module | Attached to the back of the IP phone, the module contains a |
|
| diode (LED) indicating that a cordless device is in use; also indicates the |
|
| pairing of module and a cordless device. |
|
|
|
2 | – Cordless Headset | Cordless handsfree operation for calls. If you are using the cordless |
|
| headset, you do not need to use the handset. |
3 | – Cordless Headset | Provides power to recharge the cordless headset battery. |
Charging Cradle |
| |
|
|
|
4 | – Cordless Handset | Provides power to recharge the cordless handset battery. Replaces the |
Charging Cover | cover supplied with the IP phone for corded handsets. | |
5 | – Cordless Handset | Cordless operation for handset calls. (You can transfer from the IP phone |
|
| handset to the cordless headset at any time.) |
|
|
|
97
