Mitel 5320e/5330e/5340e User Guide
Using the Configuration Assistant
If Configuration Assistant is enabled for your system, you can access this voice guided configuration portal that provides
•Dynamic Extension Express (see page 76)
•DND (see page 73)
•Manual Call Forwarding (see page 74)
•
Note: You need a Configuration Assistant extension number to use this feature. Contact your system administrator for more information.
Changing Your Station Passcode
Before using the Configuration Assistant, Mitel recommends that you change your default station (phone) passcode to something more secure.
To change your station passcode:
1.Dial 392. ENTER PASSCODE appears.
2.Enter your current passcode (the default passcode is your extension number), followed by
#. CHANGE PASSCODE TO appears.
3.Enter the new passcode followed by #. VERIFY PASSCODE appears.
4.Enter the new passcode again followed by #. DATABASE UPDATED appears.
To change the passcode from another phone, see “Changing Your Station Passcode” on page 78.
Accessing the Configuration Assistant
Follow the instructions below to access the Configuration Assistant.
To access the Configuration Assistant:
1.Access the Configuration Assistant extension number from inside or outside the system by:
•dialing it from any phone in the system.
•being transferred to it.
•dialing it from automated attendant, voice mail, or DISA.
2.Do one of the following:
•If calling from your main desktop phone, proceed to step 3.
72
