
Answering and Placing Calls
Placing Calls
The following instructions describe how to place calls and related features.
Placing Emergency Calls
WARNING:CONTACT YOUR SYSTEM ADMINISTRATOR AND YOUR LOCAL MITEL PROVIDER FOR IMPORTANT INFORMATION ABOUT DIALING EMERGENCY SERVICES BEFORE USING YOUR IP PHONE.
When dialing an emergency number (911 U.S. or 999/112 Europe), you do not have to press the Outgoing button or enter the Outgoing Call access code (8 is the default code). The system automatically places emergency calls immediately after you dial the number, even if you do not select an outside line.
Placing Emergency Calls using the LIM Line
Emergency Number dialing should only be performed by picking up the handset and selecting the Analog Line key you have programmed. If Privacy Mode is enabled and the Analog Line key local line is busy, dialing will not occur on the LIM line. Emergency dialing using an IP connection may not be supported due to system configuration and country location. For more information, contact your System Administrator. For details about LIM, see “Using the Line Interface Module (LIM)” on page 15.
To make an Emergency Call using the Line Interface Module line:
1.Lift the handset.
2.Press the Analog Line key that you have programmed. ANALOG CALL appears.
3.Dial your local emergency number.
To make an Emergency Call using the Line Interface Module line, when the IP connection has failed:
1.Lift the handset.
2.Press the Analog Line key that you have programmed. IP FAIL: ANALOG CALL appears.
3.Dial your local emergency number.
45