AppendixC Uninstallingthe Hardware and Software
SerialHardware and Software for Windows C-6 ni.com
4. Click on the Delete button.
5. Repeatsteps 3 and 4 until you have removed every PCI serial port that
you want to uninstall.
Uninstall the Software
Beforeyou uninstall the NI-Serial software, you must remove the hardware
information from your system, as described in the previous section.
Touninstall the NI-Serial software, complete the following steps:
1. SelectStart»Set tings»Control Panel.
2. Double-clickon the Add/Remove Programs ic on. The Add/Remove
Programs dialog box appears. This dialog box lists the software that
you can uninstall.
3. Select the NI-Serial software you wantto un install, and click on the
Add/Removebutton. The uninstallation pro gram removesall fold ers,
utilities,and r egistryentries associated with the NI-Serial software.
4. Shut downWindows NT, turn off your computer, and physically
removethe serial interfaces from your system.
The uninstallation program removesonly i tems that the setup wizard
installed.If you added anything to a directory that the setup wizard created,
theuninstallation program does not delete that directory. Youmust remove
anyremaining components yourself.
Toreinstall the hardware and software, refer to Chapter 2, PCI Serial
Hardware Installation, Verification, and Configuration.