Chapter5 ATSerial Hardware Installation, Verification, and Configuration
©NationalInstruments Corporation 5-3 SerialHardware and Software for Windows
Figure5-1. ATSerial Board Installation
7. Screwthe AT serial board mounting bracket to the back panel
mounting rail of the computer.
8. Replace the cover.
9. Turnon your computer and start Windows 2000.
10. Windows2000should automatically d etect your hardware and display
the FoundNew Hardware Wizard. Complete the wizard by clicking
Next in each windowand then Finish.
Ifthe FoundNew Hardware Wizarddoes not appear, refer to the
Forcing Windows to Detect Your Hardware section in Appendix D,
Troubleshooting and Common Questions.
The serial hardware installation is complete. Continue to the next section,
Verify the Installation.
1PC 2ATSocket 3 ATSerial Card
1
2
3