AppendixD Troubleshootingand Common Questions
SerialHardware and Software for Windows D-8 ni.com
6. Uncheck the Use automatic settingscheckbox and click on the
Change Settingbutton. If the system does not allow you to change the
settings, select the configuration that givesy ou a conflict-free base
addressand i nterrupt levelfrom the Setting based on list box.
7. Click on the OK button to saveyour changes.
PCMCIA Boards
Whenthe Device Manager indicates a conflict with another device, you can
usually correct the problem bymanually selecti ngc onflict-free resources.
Todo so, complete the following steps:
1. Select Start»Settings»Control Panel and double-click on the
System icon.
2. Click on the Device Manager tabandclickontheView devices by
type button.
3. Double-click on the Multi-function adapters icon.
4. From the Multi-function adapters list, double-click on the serial
interfacethat you want to ch ange.
5. Click on the Resources tab.
Note To change the resources of ports on two-port or four-port PCMCIA cards from
within theD evice Manager, youmust open the Multi-function adapters class and
double-click on the name of your interface. Use the Resources page to change the
resources.Any resource changes are automatically reflected to the c hild devices.
6. Uncheck the Use automatic settingscheckbox and click on the
Change Settingbutton. If the system does not allow you to change the
settings, select the configuration that givesy ou a conflict-free base
addressand i nterrupt levelfrom the Setting based on list box.
7. Click on the OK button to saveyour changes.