Netopia R5300, R5200, R5100 manual Budget Statistics in Hhhhmm

WAN and System Configuration 8-31

You can monitor your usage against your budget by reviewing the Connection Budget Statistics screen in the Accounting Statistics. From the Main Menu select Statistics & Logs and then Accounting Statistics and then Connection Budget Statistics.

Main	Statistics &
Menu	Logs

The Budget Statistics screen appears.

Accounting

Statistics

Connection

Budget Statistics

		Budget Statistics (in HHHH:MM)
Budget Name------		First Minutes----	Additional Minutes-------	Cutoff--Expired
Budget 1		0:00	0:00	2:00
Budget	2	0:00	0:00	5:00
Budget	3	0:00	0:00	10:00

You can view statistics for all your budgets at once or one at a time.

■Budget Name shows the names of your budgets.

■First Minutes displays the number of first minutes of outbound calls placed during the recording interval.

■Additional Minutes displays the remaining time of all outbound calls placed during the recording interval.

■Cutoff displays the number of hours budgeted for this connection profile.

■Expired displays the amount of time used against the budgeted amount.

To clear the counters and reset the statistics, use the down arrow key to select a budget and press Return. A pop-up window will ask you to confirm that you want to clear this budget’s statistics. You can cancel if you change your mind. To return to the Accounting Statistics screen, press Escape.

Note: If you have Connection Budgets configured, changing the date setting (see “Date and time” on page 8-34) will reset the Connection Budgets under one of the following conditions:

■If the new date is greater than the old date and the new date falls outside of the current budget window; or

■If the new date is in the past and the date is not the current date (i.e., yesterday or earlier).

A warning message is displayed in the console window when a budget is reset.