![](/images/new-backgrounds/1203296/203296113x1.webp)
Easy Setup
If you chose PPP as your datalink encapsulation method, select PPP Authentication and from the
5.Select NEXT SCREEN and press Return. The IP Easy Setup screen appears.
Note: For more Easy Setup options, see the next section. For more Frame Relay configuration options see “Configuring Frame Relay” on page
IP Easy Setup
The IP Easy Setup screen is where you enter information about your Netopia Router’s:
■Ethernet IP address
■Ethernet Subnet mask
■Domain Name
■Domain Name Server IP address
■Default gateway IP address
Consult with your network administrator to obtain the information you will need. For more information about setting up IP, see “IP Setup and Network Address Translation” on page
IP Easy Setup |
|
Ethernet IP Address: | 192.168.1.1 |
Ethernet Subnet Mask: | 255.255.255.0 |
Domain Name: |
|
Primary Domain Name Server: | 0.0.0.0 |
Default IP Gateway: | 0.0.0.0 |
IP Address Serving: | On |
Number of Client IP Addresses: | 100 |
1st Client Address: | 192.168.1.100 |
PREVIOUS SCREEN | NEXT SCREEN |
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
1.Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given you. This will be the Netopia Router’s IP address.
If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address defaults to an address within a range reserved by the Internet address administration authority for use within private networks, 192.168.1.1.