Aurp setup, Viewing Aurp partners | Netopia R5300, R5200, R5100

11-8 User’s Reference Guide

If another router is already present on the LocalTalk network that you will be connecting to the Netopia R5000 Series Router, use the zone name and network number used by that router for that LocalTalk network. Otherwise, your LocalTalk network may experience routing conﬂicts.

As an alternative, you can set LocalTalk seeding to soft seeding and let the Netopia R5000 Series Router receive the zone name and network number from the other router.

■Select LocalTalk Net Number and enter the desired network number.

■Select Seeding. From the pop-up menu, choose the type of seeding for the Netopia R5000 Series Router’s LocalTalk port to use (see “Routers and seeding” on page 11-3).

You have ﬁnished conﬁguring LocalTalk.

AURP setup

From the Network Protocols screen, select AppleTalk Setup. Then select AURP Setup and press Return.

The AURP Setup screen appears.

AURP Setup
AURP Enable:	On
Display/Change Partner...
Add Partner...
Delete Partner...
Enter Free Trade Zone Name:
Accept Connections From...	Configured Partners Only
Advanced Options...

AURP Allows you to connect remote AppleTalk Networks across IP.

■To activate AURP and enable connections to and from AURP partners, select AURP Enable and toggle it to

On.

Viewing AURP partners

■To see a table of existing AURP partners, select Display/Change Partner and press Return.

Note: The Netopia R5000 Series Router can deﬁne a total of 32 AURP partners.

AURP Free Trade Zone

The Free Trade Zone is an AURP security feature. It allows the Netopia administrator to specify a single AppleTalk zone that will be the only one visible to the remote side for partners that have this option enabled.

Image 144

Netopia R5300, R5200, R5100 manual Aurp setup, Viewing Aurp partners, Aurp Free Trade Zone

Contents

Netopia R5000 Series Routers Part Number Contents Setting up your Router with the SmartStart Wizard Part II Advanced Configuration Vi User’s Reference Guide Aurp Viii User’s Reference Guide Part III Appendixes User’s Reference Guide Index Index-1 Limited Warranty and Limitation of Remedies Xii User’s Reference Guide Part I Getting Started User’s Reference Guide Features and capabilities Chapter IntroductionOverview How to use this guide Chapter Setting Up Internet Services Finding an Internet service providerType of Service Data Rate Speed Datalink Protocol Unique requirements Pricing and supportEndorsements Deciding on an ISP account Obtaining information from the ISP Local LAN IP address information to obtainWith Network Address Translation Without Network Address Translation User’s Reference Guide Chapter Making the Physical Connections Find a location What you need Connect the router R5100 SerialR5200 DDS and R5300 T1 Serial Line port Identify the connectors Attach the cables Netopia R5000 Series Router status lights Netopia R5000 Series Router LED front panel User’s Reference Guide Chapter Connecting to Your Local Area Network Readying computers on your local network User’s Reference Guide Connecting to an Ethernet network Crossover Switch Auxiliary port Port Ethernet hub10Base-T Adding an external modem Connecting to a LocalTalk network User’s Reference Guide Chapter Setting up your Router with the SmartStart Wizard Installed and properly conﬁgured. See Before running SmartStart Setting up your Router with the SmartStart Wizard SmartStart Wizard configuration screens Setup options screen. You can choose either Easy or Easy option Advanced option Conﬁguration screen on Dynamic configuration recommended Conﬁguration tab Static configuration optional Add. Repeat this process for the secondary DNS Configuring TCP/IP on Macintosh computers TCP/IP TCP/IP or MacTCP Dynamic configuration using MacIP optional Close the TCP/IP control panel and save the settings Setting up your Router with the SmartStart Wizard User’s Reference Guide Chapter Console-Based Management Connecting through a Telnet session Filter sets ﬁrewalls. See Security onSnmp Simple Network Management Protocol. See Snmp on Configuring Telnet software Connecting a console cable to your router Navigating through the console screens Mac ANSI, VT-100, or VT-200 Chapter Easy Setup Easy Setup console screensAccessing the Easy Setup console screens Screen differences See Appendix A, Troubleshooting, for more suggestions Screen similar to the following Main Menu appears Serial Line Easy Setup configuration screen Serial Line Easy Setup screen appears T1 Line configuration screen T1 Line Conﬁguration screen appears DDS Line configuration screen DDS Line Conﬁguration screen appears Easy Setup Profile screen Easy Setup Proﬁle screen appears IP Easy Setup Easy Setup Security Configuration Easy Setup User’s Reference Guide Part II Advanced Configuration User’s Reference Guide Chapter WAN and System Configuration WAN configurationConfiguration Line configuration for a Serial line Line configuration for a DDS line Line configuration for a T1 line WAN and System Conﬁguration Configuring Frame Relay Easy Setup Frame Relay screensMain Menu Easy Setup Line Configuration WAN Configuration Frame Relay screens Setup Line Configuration Frame Relay configuration WAN and System Conﬁguration Frame Relay Dlci configuration Displaying a Frame Relay Dlci configuration table Changing a Frame Relay Dlci configuration WAN and System Conﬁguration Adding a Frame Relay Dlci configuration Dlci Deleting a Frame Relay Dlci configuration ADD Profile NOW Cancel Creating a new Connection Proﬁle IPX Profile Parameters Remote IPX Network Datalink Frame Relay Options Auto-Detect DLCIs PAP Dial IP Address IPX Network-+ Default profile Configuration Default Profile IP parameters default profile screen IPX parameters default profile screen Scheduled connections switched async only Configuration Scheduled Connections Viewing scheduled connections Adding a scheduled connection Set Weekly Schedule Set Once-Only Schedule Modifying a scheduled connection Deleting a scheduled connection Connection accounting screens switched async only Budget Setup screen appears Budget Statistics in Hhhhmm System configuration screens Navigating through the system configuration screens System configuration features Network protocols setup Filter sets firewallsIP address serving Date and time Console configuration Upgrade feature set Snmp Simple Network Management ProtocolSecurity Logging Installing the Syslog client User’s Reference Guide Chapter IP Setup and Network Address Translation Network Address Translation features HOW NAT Works Using Network Address Translation Previous Screen V2 multicast Numbered Unnumbered Associating port numbers with nodes Sdsl WAN1 Advanced IP/IPX router configuration options Connection Profiles ATM Funi IPX Profile Parameters Remote IPX Network Network Address Translation guidelines IP setup IP Setup and Network Address Translation Select Add Export. The Add Exported Service screen appears Select Service. a pop-up menu of services and ports appears IP subnets IP Setup and Network Address Translation Static routes Static Routes screen will appear Viewing static routes Adding a static route Rules of static route installation Modifying a static routeDeleting a static route Main System Menu Configuration IP Address Serving 176.163.222.10 Dhcp NetBios Options Serve Bootp Clients IP Address Pools User’s Reference Guide Dhcp NetBIOS Options NetBios Type MacIP KIP forwarding setup Select Release BootP Leases and press Return You have ﬁnished your IP setup Chapter IPX Setup IPX featuresIPX definitions Internetwork Packet Exchange IPX Service Advertising Protocol SAP IPX addressSocket Routing Information Protocol RIP NetBIOS IPX setup screenIPX spoofing Default Gateway Address IPX routing tables User’s Reference Guide Chapter AppleTalk Setup AppleTalk networksAppleTalk protocol AT Routing Table MacIP Routers and seeding Installing AppleTalk Upgrade NOW Configuring AppleTalk EtherTalk setup LocalTalk setup Aurp setup Viewing Aurp partnersAurp Free Trade Zone Adding an Aurp partner Modifying an Aurp partner Configuring Aurp Options Deleting an Aurp partnerReceiving Aurp connections Aurp Options Tickle Interval Hhmmss User’s Reference Guide Chapter Monitoring Tools Quick View status overview General status Current status Status lights Statistics & Logs General Statistics Physical InterfaceNetwork Interface Event histories WAN Event History Routing tables Device Event History IP routing table IPX routing table IPX Sap Bindery table AppleTalk routing table Served IP Addresses IP Address Lease Management screen appears System Information Snmp Snmp Setup screen Community strings Snmp traps Setting the IP trap receivers Viewing IP trap receiversModifying IP trap receivers Deleting IP trap receivers T1 Diagnostics T1 Line Statistics and Diagnostics screenSelect T1 Line Statistics / Diagnostics and press Return T1 Line Statistics / Diagnostics screen appears Monitoring Tools Web-based monitoring Accounting for switched interfaces only Frame Relay Statistics Connection Status Connect/Disconnect Router Budget Configuration Connection Budgets Connection Budget Configuration Budget Statistics Event History pages Device Event History Chapter Security Suggested security measuresUser accounts Protecting the configuration screens Protecting the Security Options screen Dial-in console access Enable SmartStart/SmartView/Web server Telnet accessAbout filters and filter sets What’s a filter and what’s a filter set? How filter sets work Filter priority User’s Reference Guide How individual filters work Filter’s actionsFiltering rule Parts of a filter 161 Aurp AppleTalk 387 Who 513Port number comparisons Other filter attributes Putting the parts togetherInternet Control Message Protocol Transmission Control Protocol Filtering example #1 Design guidelines Filtering example #2Disadvantages of filters An approach to using filters Working with IP filters and filter sets Adding a filter set Naming a new filter set Input and output filters-source and destination Netopia Router ADD this Filter NOW Cancel User’s Reference Guide Moving filters Viewing filtersModifying filters Viewing filter sets Deleting filters Sample IP filter set Modifying filter sets TCP Icmp UDP Possible modifications User’s Reference Guide Main Menu System Configuration Filter Sets Firewalls IPX filters IPX packet filters Viewing and modifying packet filtersAdding a packet filter IPX packet filter sets Deleting a packet filterViewing and modifying packet filter sets Adding a packet filter set No Match IPX SAP filters Deleting a packet filter setViewing and modifying SAP filters Adding a SAP filter Deleting a SAP filter IPX SAP filter sets Viewing and modifying SAP filter setsAdding a SAP filter set Deleting a SAP filter set Firewall tutorial General firewall terms Basic IP packet componentsBasic protocol types ACK Bit Yes Firewall design rules Example TCP/UDP PortsFirewall Logic Binary representation Logical and function Implied rules Established connectionsExample IP filter set screen Filter basics Example network Example filters Example Example Example Chapter Utilities and Diagnostics Ping Utilities and Diagnostics Time Stop Ping Trace Route Telnet client Factory defaults Disconnect Telnet console session Transferring configuration and firmware files with Tftp Updating firmware Downloading configuration files Uploading configuration files Transferring configuration and firmware files with Xmodem Idle Do you want to send a saved configuration to your Netopia? Restarting the system User’s Reference Guide Part III Appendixes User’s Reference Guide Appendix a Troubleshooting Configuration problems Console connection problems Network problems How to reset the router to factory defaults Power outages How to reach us Technical supportBefore contacting Netopia Environment profile Netopia Bulletin Board Service 1 Online product informationProduct information can be found in the following FAX-Back User’s Reference Guide What is IP? Appendix B Understanding IP AddressingAbout IP addressing Subnets and subnet masks Example Using subnets on a Class C IP internet Subnet masks Network configuration Customer Site a ISP Network Example Working with a Class C subnet Distributing IP addressesBackground Technical note on subnet masking Configuration Netopia R5000 Series Router Dhcp server characteristics255.255.255.192 255.255.255.0 Using address serving Manually distributing IP addressesMacIP serving Tips and rules for distributing IP addresses Serve dynamic WAN clients Dhcp example Nested IP subnets Internet 0.0 C.1 WAN 3719 Broadcasts Packet header types User’s Reference Guide Network configuration Appendix C Understanding Netopia NAT BehaviorBackground User’s Reference Guide Understanding Netopia NAT Behavior C-3 Netopia Router WWW Server ISP Router LAN Exported services Understanding Netopia NAT Behavior C-5 Important notes Understanding Netopia NAT Behavior C-7 Summary Appendix D Binary Conversion Table Decimal Binary Appendix E Further Reading User’s Reference Guide Further Reading E-3 No August User’s Reference Guide Appendix F Technical Specifications and Safety Information Pinouts for Auxiliary port modem cableHD-15 DB-25 Pin Ground Not used Pin Not used DCE Ready HD-15 DB-25 Pin Pin Rset EIA-530Pin Not used Tset EIA-530 Pin Not used Power requirements DescriptionEnvironment Software and protocols Agency approvals Regulatory noticesNorth America R5100, R5200, R5300 FCC Class B Technical Speciﬁcations and Safety Information F-5 Important safety instructions Australian Safety Information R5100Declaration for Canadian users Telecommunication installation cautions Battery User’s Reference Guide Glossary User’s Reference Guide Glossary User’s Reference Guide Glossary Remapping See network number remapping Glossary User’s Reference Guide Index Numerics Display Deﬁned Index-3 Account types LocalTalk conﬁguration Index-4 Index-5 Index-6 Limited Warranty and Limitation of Remedies User’s Reference Guide