Nortel Networks 24T manual Describes the IP Configuration/Setup screen fields

Using the BayStack 410-24T 10BASE-T Switch

IP Configuration/Setup

The IP Configuration/Setup screen (Figure 3-3) allows you to set or modify the BayStack 410-24T switch IP configuration parameters. Data that you enter in the user-configurable fields takes effect as soon as you press [Enter].

Choose IP Configuration/Setup (or press i) from the main menu to open the IP Configuration/Setup screen.

	IP Configuration/Setup
BootP Request Mode: [ BootP Disabled			]
	Configurable	In Use		Last BootP
	-------------------	---------------		---------------
In-Band Stack IP Address:	[ 0.0.0.0 ]			0.0.0.0
In-Band Switch IP Address: [ 0.0.0.0 ]				0.0.0.0
In-Band Subnet Mask:	[ 0.0.0.0 ]	0.0.0.0		0.0.0.0
Default Gateway:	[ 0.0.0.0 ]	0.0.0.0		0.0.0.0
IP Address to Ping:	[ 0.0.0.0 ]
Start Ping:	[ No ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-3. IP Configuration/Setup Screen

Note: The read-only fields in this screen are updated based on the BootP mode specified in the BootP Request Mode field. (See “Choosing a BootP Request Mode” on page 3-10 for more information.)

Table 3-2 describes the IP Configuration/Setup screen fields.

3-8 309985-B Rev 00