Nortel Networks 24T Igmp Configuration, Option Description Display Multicast Group, Membership

Using the BayStack 410-24T 10BASE-T Switch

Table 3-27. IGMP Configuration Menu Screen Options (continued)

Option	Description
Display Multicast Group	Displays the Multicast Group Membership screen (see “Multicast Group
Membership...	Membership” on page 3-76). This screen allows you to view all IP multicast
	addresses that are active in the current LAN.
Return to Switch	Exits the IGMP Configuration Menu screen and displays the Switch
Configuration Menu	Configuration Menu screen.

IGMP Configuration

Figure 3-32 shows an example of the IGMP Configuration screen in a stacked configuration. When installed as a standalone switch, the screen does not display the Unit # field designation.

In this example, switch ports 8 and 14 of unit 1, ports 2 and 6 of unit 2, and port 16 of unit 4 are set to receive all IP multicast-related traffic. The configured ports are VLAN port members of VLAN 5, and are called Static Router Ports.

Choose IGMP Configuration (or press g) from the IGMP Configuration Menu screen to open the IGMP Configuration screen.

3-72 309985-B Rev 00