Nortel Networks 24T manual High Speed Flow Control Configuration Screen

Using the Console Interface

Choose High Speed Flow Control Configuration (or press h) from the Switch Configuration Menu screen to open the High Speed Flow Control Configuration screen.

High Speed Flow Control Configuration

Unit:	[ 2 ]
Autonegotiation:	[ Enabled	]
Flow Control:	[ Disabled	]
Preferred Phy:	[ Right ]
Active Phy:	None

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-23. High Speed Flow Control Configuration Screen

Table 3-20 describes the High Speed Flow Control Configuration screen fields.

Table 3-20. High Speed Flow Control Configuration Screen Fields

Field	Description
Unit	Allows you to select the unit number (when stacking is configured) to view or
	configure. To view or configure another unit, type its unit number and press
	[Enter], or press the spacebar to toggle the unit numbers (the system only
	displays a screen for units that are configured with a gigabit MDA).
Autonegotiation	When enabled, the port only advertises support for 1000 Mb/s operation, in
	full-duplex mode.
	Default Value	Enabled
	Range	Enabled, Disabled
		(continued)
309985-B Rev 00		3-55