Nortel Networks 24T describes the Vlan Configuration screen fields, Field Description Create Vlan

Using the Console Interface

			VLAN Configuration
Create VLAN:		[	1 ]		VLAN Type:		[	Port-Based	]
Delete VLAN:		[	]		Protocol Id (PID): [			None	]
VLAN Name:		[ VLAN #1 ]			User-Defined PID:		[ 0x0000 ]
Management VLAN: [ Yes ]					VLAN State:		[	Active	]
			Port Membership
	1-6		7-12	13-18	19-24	25-28
	------		------	------	------	------
Unit #1	UUUUUU		UUUUUU	UUUUUU	UUUUUU	UUUU
Unit #2	UUUUUU		UUUUUU	UUUUUU	UUUUUU
Unit #3	UUUUUU		UUUUUU	UUUUUU	UUUUUU
Unit #4	UUUUUU		UUUUUU	UUUUUU	UUUUUU

KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of

VLAN

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-17. VLAN Configuration Screen

	Table 3-13 describes the VLAN Configuration screen fields.
Table 3-13.	VLAN Configuration Screen Fields
Field	Description
Create VLAN	Allows you to set up or view configured VLAN workgroups. Enter the number of the
	new VLAN you want to create or view, then press [Enter]. The Port Membership
	fields indicate the corresponding VLAN workgroup configuration, if configured, or all
	dashes (-), indicating no VLAN Members configured. Alternatively, you can use the
	space bar to toggle through the various configured VLAN workgroups. You can
	create up to 64 different VLANs (including VLAN 1).
	Default	1
	Range	2 to 4094
		(continued)

309985-B Rev 00 3-41