|
| Using the Console Interface |
|
| |
Table | Spanning Tree Port Configuration Screen Fields (continued) | |
|
|
|
Field | Description |
|
|
| |
Participation | Allows you to configure any (or all) of the switch ports for Spanning tree participation. | |
| When an individual port is a trunk member (see Trunk field), changing this setting for one | |
| of the trunk members changes the setting for all members of that trunk. You should | |
| consider how this can change your network topology before you change this setting (see | |
| “MultiLink Trunking Configuration Rules” on page | |
| The Fast Learning parameter is the same as Normal Learning, except that the state | |
| transition timer is shortened to two seconds. | |
| Default Value | Normal Learning |
| Range | Normal Learning, Fast Learning, Disabled |
Priority | This | |
| path cost to the root. When one or more ports have the same path cost, the STA selects | |
| the path with the highest priority (lowest numerical value). See also Path Cost. | |
| Default Value | 128 |
| Range | 0 to 255 |
Path Cost | This | |
| cost to the root. |
|
| Default Value | 10 or 100 |
|
| Path Cost = 1000/LAN speed (in Mb/s) |
|
| The higher the LAN speed, the lower the path cost. |
|
| See also Priority. |
| Range | 1 to 65535 |
State | This | |
| Each port can transition to various states, as determined by the Participation field setting. | |
| For example, when the Participation field is set to Disabled, the port does not participate | |
| in the STA and transitions to the Forwarding state (the default). When the Participation | |
| field is set to Enabled, the port transitions from the Disabled state through the Blocking, | |
| Listening, and Learning states before entering the Forwarding state. | |
| Default Value | Topology dependent |
| Range | Disabled, Blocking, Listening, Learning, Forwarding |
|
|
|
|