Nortel Networks 24T manual Appears in this CI screen Field Default setting

Table E-1. Factory Default Settings for the BayStack 410-24T Switch (continued)

Appears in this CI screen	Field	Default setting
Renumber Stack Units (page 3-89)	New Unit Number	Current stack order
(Only appears when the switch is a	Renumber units with new
participant in a stack configuration.)	setting?	No
Spanning Tree Port Configuration
(page 3-93)	Unit	1
	Participation	Normal Learning
	Priority	128
	Path Cost	10 or 100
Spanning Tree Switch Settings (page 3-96)	Bridge Priority	8000 (read only)
	Designated Root	8000 (bridge_id) (read only)
	Root Port	Unit: 0 / Port: 0 (read only)
	Root Path Cost	0 (read only)
	Hello Time	2 seconds (read only)
	Maximum Age Time	20 seconds (read only)
	Forward Delay	15 seconds (read only)
	Bridge Hello Time	2 seconds (read only)
	Bridge Maximum Age Time	20 seconds (read only)
	Bridge Forward Delay	15 seconds (read only)
TELNET Configuration (page 3-99)	TELNET Access	Enabled
	Login Timeout	1 minute
	Login Retries	3
	Inactivity Timeout	15 minutes
	Event Logging	All
	Allowed Source IP Address	First field: 0.0.0.0
	(10 user-configurable fields)	(no IP address assigned)
		Remaining nine fields:
		255.255.255.255
		(any address is allowed)
		(continued)