Nortel Networks 24T manual Front Panel, Comm Port

Using the BayStack 410-24T 10BASE-T Switch

Front Panel

Figure 1-2 shows the BayStack 410-24T switch front panel. Descriptions of the front panel components follow the figure.

For a description of the components located on the back panel of the BayStack 410-24T switch, see “Back Panel” on page 1-6.

1 2 3 4

Comm Port

Uplink/Expansion Module 25 26 27 28

1 = Comm Port

2 = Uplink/Expansion slot

3 = 10BASE-T port connectors

4 = LED display panel

1	3		5	7	9	11	13	15	17	19	21	23
2	4	6		8	10	12	14	16	18	20	22	24

BayStack 410-24T

	1
Cas	Link

Pwr Up

Activity

Status Dwn

Link

RPSU Base

Activity

BS41002A

Figure 1-2. BayStack 410-24T Switch Front Panel

Comm Port

The Comm Port (also referred to as the Console/Comm Port) allows you to access the console interface (CI) screens and customize your network using the supplied menus and screens (see Chapter 3, “Using the Console Interface”).

The Console/Comm Port is a DB-9, RS-232-D male serial port connector. You can use this connector to connect a management station or console/terminal to the switch by using a straight-through DB-9 to DB-9 standard serial port cable (see “Console/Comm Port” on page 2-10).

1-2 309985-B Rev 00