Nortel Networks 24T manual To configure the port priority level, follow these steps

Introduction to the BayStack 410-24T Switch

To configure the port priority level, follow these steps:

1.Determine the priority level you want to assign to the switch port.

User priority levels are assigned default settings in all BayStack 410-24T switches. The range is from 0 to 7. The traffic class table can be modified, therefore, view the settings shown in the Traffic Class Configuration screen before setting the port priority in the VLAN Port Configuration screen.

2.Select Switch Configuration from the BayStack 410-24T switch Main Menu (or press w).

3.From the Switch Configuration Menu, select VLAN Configuration (or press v).

4.From the VLAN Configuration Menu, select Traffic Class Configuration (or press t).

The Traffic Class Configuration screen opens (Figure 1-36).

Traffic Class Configuration
User Priority	Traffic Class
-------------	-------------
Priority 0:	[ Low	]
Priority 1:	[ Low	]
Priority 2:	[ Low	]
Priority 3:	[ Low	]
Priority 4:	[ Low	]
Priority 5:	[ Low	]
Priority 6:	[ Low	]
Priority 7:	[ Low	]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-36. Default Traffic Class Configuration Screen Example

309985-B Rev 00 1-59