Introduction to the BayStack 410-24T Switch

1

2

Unit 1

In

Unit 2

Unit 3

Unit 4

Unit 5

Unit 6

Unit 7

Unit 8

O ut

1 = Base unit

2 = Last unit

3

3 = Cascade cable (PN 303978-A)4 4 = Cascade max-return cable (PN 303979-A)

BS41012A

Figure 1-13. Stack Down Configuration Example

Certain network management station (NMS) applications assume a stack-down configuration for the graphical user interface (GUI) that represents the stack (see Figure 1-13 on page 1-33). For this reason, Nortel Networks recommends that you always configure the top unit in the stack as the base unit.

In any stack configuration, the following applies:

The entire stack powers up as a single logical unit within 30 seconds after the base unit initialization.

You can attach an RS-232 communications cable to the Console/Comm port of any switch in the stack.

309985-B Rev 00

1-33

Page 61
Image 61
Nortel Networks 24T manual Stack Down Configuration Example