Configuring Ports as Static Router Ports

Using the Console Interface

Table 3-28. IGMP Configuration Screen Fields (continued)

FieldDescription

Set Router Ports Selects the IGMP version according to the IGMPv1 (Version 1) or IGMPv2 (Version

2)standard (see RFC 2236). Use this field in conjunction with the Static Router Ports field (see next field description) to select the IGMP version to set.

You can also use this field to view which static router ports are set to Version 1 or to Version 2. Use the space bar to toggle between the two versions and view the static router ports settings.

This field affects all VLANs (for example, if you change the value of the Set Router Ports field on the VLAN specified in the screen’s VLAN field, ALL VLANs are affected).

Default Value	Version 1
Range	Version 1, Version 2

Static Router Ports Allows you to assign switch ports to receive all IP multicast-related traffic. When the unit is part of a stack configuration, the screen displays the unit numbers of the switches configured in the stack, along with the corresponding ports.

The configured ports do not filter any IP multicast traffic. The Static Router Ports fields are displayed in six-port groups (for example, 1-6, 7-12, 13-18). The number of ports displayed depends on the switch model or type of optional MDA that is installed in the Uplink Module slot.

This field affects all VLANs (for example, if you assign a port as a static router port in this screen, the port becomes a static router port for the VLAN specified in the screen’s VLAN field, and also for any other VLAN where this port is a member).

See also “Configuring Ports as Static Router Ports” following this table.

Default Value

Range-, X