Nortel Networks 24T manual To configure the Pvid port Vlan identifier for Port

Introduction to the BayStack 410-24T Switch

Ports 2, 4, 6, 8, 10, and 11 are now untagged members of VLAN 3 as shown in

Figure 1-25 on page 1-45.

		VLAN Configuration
Create VLAN:	[	3 ]	VLAN Type:	[	Port-Based	]
Delete VLAN:	[	]	Protocol Id (PID): [		None	]
VLAN Name:	[ Mary's VLAN ]		User-Defined PID:	[ 0x0000 ]
Management VLAN: [ Yes ]			VLAN State:	[	Active	]
Port Membership
1-6		7-12
------		------
Unit #1 -U-U-U		-U-UU-

KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-27. VLAN Configuration Screen Example

To configure the PVID (port VLAN identifier) for Port 8:

1.From the VLAN Configuration screen, press [Ctrl]-R to return to the VLAN Configuration Menu.

2.From the VLAN Configuration Menu, select VLAN Port Configuration (or press c).

The default VLAN Port Configuration screen opens (Figure 1-28).

The VLAN Port Configuration screen settings shown in Figure 1-28 are default settings.

309985-B Rev 00 1-47