Using the Console Interface

Table 3-11.

MAC Address Security Table Screen Fields

 

 

 

 

Field

Description

 

 

 

 

Find an Address

Allows you to search for a specific MAC address that is used in any of the

 

MAC Address Security Table screens.

MAC Address

Allows you to specify up to 448 MAC addresses that are authorized to access

 

the switch. You can specify the ports that each MAC address is allowed to

 

access using the Allowed Source field (see next field description). The

 

specified MAC address does not take effect until the Allowed Source field is

 

set to some value (a single unit/port number or a port list value that you

 

previously configured in the MAC Address Security Port Lists screen). You can

 

clear an existing MAC address field by entering zero (0) in the field and

 

pressing [Enter].

 

 

 

Default

-

- - - - (no address assigned)

 

Range

A range of 6 Hex Octets, separated by dashes (multicast1 and

 

 

broadcast addresses are not allowed).

Allowed Source

Allows you to specify the ports that each MAC address is allowed to access.

 

The options for the Allowed Source field include a single unit/port number or a

 

port list value that you have previously configured in the MAC Address

 

Security Port Lists screen.

 

Default

-

(Blank field)

 

Range

A single unit/port or a port list value (for example, 1/3, 1/6,

 

 

3/4, S1, S5, etc.).

 

 

 

 

1 Multicast address -- Note that the first octet of any Multicast address will always be an odd number.

309985-B Rev 00

3-37

Page 175
Image 175
Nortel Networks 24T manual MAC Address Security Table Screen Fields, Allowed Source