Nortel Networks 24T manual IP Configuration/Setup Screen Standalone Switch

Installing the BayStack 410-24T Switch

	IP Configuration/Setup
BootP Request Mode: [ BootP Disabled			]
	Configurable	In Use		Last BootP
	-------------------	---------------		---------------
In-Band Stack IP Address:	[ 0.0.0.0 ]			0.0.0.0
In-Band Switch IP Address: [ 0.0.0.0 ]				0.0.0.0
In-Band Subnet Mask:	[ 0.0.0.0 ]	0.0.0.0		0.0.0.0
Default Gateway:	[ 0.0.0.0 ]	0.0.0.0		0.0.0.0
IP Address to Ping:	[ 0.0.0.0 ]
Start Ping:	[ No ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 2-14. IP Configuration/Setup Screen (Standalone Switch)

4.Enter the IP address of the switch in the In-Band IP Address field, then press [Return].

Note: When the IP address is entered in the In-Band IP Address field, and the In-Band Subnet Mask field is not present, the software provides an in-usedefault value for the In-Band Subnet Mask field, based on the class of the entered IP address.

5.Enter the IP subnet mask address in the In-BandSubnet Mask field, then press [Return].

6.Enter the default gateway address in the Default Gateway field, then press [Return].

Proceed to Chapter 3, “Using the Console Interface,” for detailed descriptions of the menus and screens you can use to customize your configuration.

309985-B Rev 00 2-19