The application judges that the top 1 inch of “Top Margin 2 inches” is the printer’s mechanical Auto Loading position, therefore the application does not produce data for the actual data transfer. Thus, the application produces data while ignoring the data in the first 1 inch from the top of that data. Unless you set the printer Auto Loading to 1 inch, you cannot get the printing result you expect.
This function is valid with printers that support Auto Loading. Although this printer does not support Auto Loading, the printer menu setting has “Top Adjust.” Thus, you can access this function by changing this menu setting.
Normally, you need not change, but use this function as needed.
