Oki 425D manual Using the Micr Reader

2.5 Using the MICR Reader

If your printer has the factory installed optional MICR (Magnetic Ink Character Recognition) reader that enables the printer to read and process MICR characters on personal checks, read this section.

Note 1: If Cut-sheet Paper or Sprocket Paper has been loaded, eject it before you use the MICR feature. This does not apply to the Roll Paper.

Note 2: When the Tractor (Option) (1) has been installed, remove or park the Sprocket Paper, then switch the Lever to the Cut Sheet side (1) from the Sprocket side (3)

2

1

3

Note 3: When using a MICR-version machine, align the marks “ ▲” and “ ▼” as shown and set the paper along the paper guide.

Note 4: Use a flat Check Sheet. If you use Check Sheets that are dog-eared, have wrinkles, or are wavy, they are more likely to cause a paper jam, scan failure, or damage to the MICR Head.

1

1Sheet Guide

Developer’s Guide: English 41