
2.1.1 Switching Functions
No.
1
2
3
Switch
SW2
(FF/LOD,PAK)
SW3
(CUT)
SW1
(LF)
Function in Modes other than Tractor
In Receipt Mode:
Feeds Receipt paper for the specified length (10/6”)
In Slip Mode: Ejects a fed slip paper
In Validation Mode: Disabled *Printing will not be started.
In Receipt/Slip/Validation Modes: Disabled
In Receipt Mode: Feed a line of Receipt paper
In slip mode: Feed a line of a fed Slip paper
In Validation mode: Disabled *Printing will not be started.
Function in Tractor Mode
Without paper: Automatic loading
With paper: Automatic parking
At cutting position:
Reverse – feed to the printing position
At printing position:
Feed to the cutting position Without paper: Disabled
With a single push:
One line feed of Sprocket paper With a continuous push: Page feed *A line is fed immediately after a switch push, and a page after a 500ms continuous push.
*Printing will not be started
4
SW4 (Receipt LF)
Feeds a line of Receipt paper
*Enabled regardless of media mode and media state.
*The above switch operations in principle correspond to special commands for switch control. Note 1) Disabled when the menu “Auto Cutter Unit = No” i