2.3 Menu Function (Receipt)

Overview

The menu function is the local function that sets each mode to control the printer and adjust it. This mode has the following items, saved in the E2P-ROM. This information is printed only when the menu mode is activated at Power On, and the information can be overwritten from the operator panel.

Menu Print is printed in Receipt Mode.

The menu determines the initialization state of each mode.

2.3.1 OEM — Standard Model

No.

Item

1Auto Cutter Unit

2MICR Unit

3Print Registration

4Top Adjust

5Cut Adjust

6Width of Roll Paper

O = default value

Function

Selects Auto Cutter Unit

Installed/Not Installed

Selects MICR Unit Installed/Not Installed

Adjusts the print position if it shifts in Forward printing and Reverse printing

Adjusts Top of Form position when Slip/Sprocket are used

Adjusts Cut Position when cutting Sprocket paper

Selects the paper width of Roll paper.

(Changes the print area)

Sets

OYes No

Yes (CMC-7)

Yes (E-13B)

ONo 0.25mm Right 0.20mm Right 0.15mm Right 0.10mm Right 0.05mm Right 0

0.05mm Left 0.10mm Left 0.15mm Left 0.20mm Left 0.25mm Left -1.75mm ~+1.75mm *Can be set in the 0.35mm unit

*Default value: 0 mm -1.75mm ~+1.75mm *Can be set in the 0.35mm unit

*Default value: 0 mm O 76.2mm

69.5mm

Note

For No. 3, 4, and 5, adjust to the proper values at factory shipment.

Developer’s Guide: English 37

Page 37
Image 37
Oki 425D manual Menu Function Receipt, OEM Standard Model, Overview