
2 Counterfoil and Stub
1
1Printing area
2Stub
3Inserting direction
Symbol | Designation |
W | Paper width |
L | Paper length |
APrint starting position
BLeft margin
CRight margin
DPrinting area width
2
3
Standard Value
70mm (2.76 inch) or more
40mm (1.57 inch) or more
18mm (0.7 inch) or less
2.54mm (0.1 inch) or more
2.54mm (0.1 inch)
Max 160.02mm (6.3 inch)
Note 1 To feed paper, insert a paper from the top side of the device and keep holding it until printing ends.
Note 2 Use a flat sheet free curls, bends (especially those on its edges), cambers, wrinkles, etc. If a sheet is not flat, it may be contaminated with ink due to ink ribbon contact.
Note 3 Before printing on a stub, fold the other sheets backward to make the stub available for print as shown in the fig. below.
1
2
1Fold backward
2Stub