Managing active calls

Managing active calls

When you make or receive a call, the Active Call View appears. Use the 5-way navigator to access the onscreen buttons in this view.

Call duration

Caller’s name and number

The onscreen buttons in the Active Call View perform the following functions:

Ends the call immediately. You can also press the headset button (if the headset is attached).

Turns on the speakerphone. When the speakerphone is on, you can take the smartphone away from your ear and use other features during a call. For example, you can check your calendar or look up contact info.

Turns off the speakerphone when it is on.

Replaces the Spkr-phone button when a Bluetooth headset is attached. Select this button to transfer the call from the Bluetooth headset to the built-in earpiece.

Did You Know?

To avoid accidentally pressing onscreen buttons while you’re holding the smartphone up to your ear to speak, you can disable the screen’s touch-sensitive feature during active calls (see Locking your screen).

Tip

If the screen dims during a call, press any key except Power/End to restore the screen brightness. Be careful not to press Power/ End to restore the screen brightness because this will accidentally end the call.

Did You Know?

You can set how long the screen stays at full brightness during phone calls. See

Optimizing power settings for details.

Using Your Treo 700P Smartphone

49

Page 55
Image 55
Palm 700P manual Managing active calls