Managing active calls
2.If the Do you want to switch to Flash mode prompt appears, select Yes.
3.While in Flash mode, do any of the following:
•If you have one active call and answer an incoming second
call, press Send 
to swap between the calls.
•If you have one active call, to make an outgoing second call, dial the number using any of the methods described in Making calls.
•If you have one active call and place an outgoing second call,
press Send 
after establishing a connection with the second party to set up a conference session using
•If you have two calls in conference, press Send 
to hang up one of the calls; you can then dial another number and place the new caller into the conference session.
4.To exit Flash mode and end all the calls, press Power/End 
.
Using Your Treo 700P Smartphone | 56 |
