Charging the battery

Charging the battery

The battery comes with a sufficient charge to complete the setup process and activate your phone. After activation, we recommend charging your smartphone for 3.5 hours (or until the indicator light is solid green) to give it a full charge. See Maximizing battery life for tips on maximizing the life of your smartphone’s battery.

1.Plug the AC charger into a wall outlet.

2.Connect the charger cable to the bottom of the smartphone. Make sure the arrow on the connector is facing up, toward the screen.

Tip

If the indicator light does not turn on when you connect your smartphone to the AC charger, double-check the cable connection and the electrical outlet to which it is connected.

Did You Know?

You can also charge your smartphone by connecting it to your computer with the sync cable. You can do this with or without using the charger cable (see Connecting your Treo smartphone to your computer).

Tip

Keep in mind that it takes longer to charge the battery using the sync cable, and if your laptop isn’t plugged into a power source, it can drain the laptop’s battery.

Using Your Treo 700P Smartphone

8

Page 14
Image 14
Palm 700P manual Charging the battery