Beaming information
5.Select the application you want to transfer.
6.Select Beam.
7.When the Beam Status dialog box appears, point the IR port on your smartphone directly at the IR port of the receiving device.
8.Wait for the Beam Status dialog box to indicate that the transfer is complete before you continue using your smartphone.
Receiving beamed information
1.Turn on your screen.
2.Select the beam command on the transmitting device.
3.Point the IR port on your Treo smartphone directly at the IR port of the transmitting device to open the Beam Status dialog box.
4.When the Beam Status dialog box appears, select a category for the entry.
5.Select Yes to receive the information or No to refuse it.
Tip
If you do not select a category upon receiving a beamed item, the item
is placed in the Unfiled category.
Tip
If you can’t receive beamed information, make sure the Beam Receive option is turned on (see
Optimizing power settings), and that you are not running a third- party application that disables beaming. If you still can’t receive a beam, try a soft reset (see Resetting your
smartphone).
Using Your Treo 700P Smartphone | 203 |
