Panasonic KX-FC241AL manual Connections, Base unit, Charger unit, Preparation

3. Preparation

3.1 Connections

Important:

LThe unit will not function when there is a power failure. To make calls in emergency situations, you should connect a telephone that can function during a power failure to the telephone line.

3.1.1 Base unit

1 Power cord

LConnect to the power outlet (220 V – 240 V, 50/60 Hz).

2Telephone line cord

LConnect to a single telephone line jack.

1

2

(For Australian users)

(For New Zealand users)

This model is designed to be used in Australia and New Zealand. TO USE IN NEW

ZEALAND, CHANGE THE LOCATION SETTING (feature #74 on page 69).

Caution:

LWhen you operate this product, the power

outlet should be near the product and easily accessible.

LBe sure to use the telephone line cord included in this unit.

LDo not extend the telephone line cord.

Note:

LIf any other device is connected to the same telephone line, this unit may disturb the network condition of the device.

LIf you use the unit with a computer and your internet provider instructs you to install a filter (3), please connect the telephone line cord as follows.

3

3.1.2 Charger unit

1AC adaptor

LConnect to the power outlet (220 V – 240 V, 50/60 Hz).

2Hooks

LFasten the AC adaptor cord to prevent it from being disconnected.

1

2

Caution:

LIf the cordless handset is not charged, you cannot make or answer calls.

LUSE ONLY WITH the included Panasonic AC adaptor.

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

22