9. Programmable Features
8.Select a memory location, then press ,. L Previously stored telephone numbers are
displayed.
9.Enter the telephone number or area code to be restricted (up to 8 digits), then press
,.
L To erase a restricted number, press {C}.
10.Press {ih}.
Note:
LIf you put a first digit in step 9, the previously stored number will be all cleared. We recommend you to write down the previously stored number.
Selecting area codes to be deleted automatically
In some situations, phone numbers stored automatically in the Caller ID list (page 40) will include area codes. If you do not want to dial the area codes when making calls from the Caller ID list, you can store the area codes which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the Caller ID list to the phone number
1.Press $(centre of joystick).
2.Select u, then press ,.
3.Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page 80).
4.Select “Call Option”, then press ,.
5.Select “Set ARS”, then press ,.
6.Select “Set Area Code”, then press ,.
7.Select an area code location
LIf the location already contains an area code, the code is displayed.
8.Enter an area code (5 digits max.), then press ,.
9.Press {ih}.
Note:
LThe use of this feature can prevent a National Call from being dialled. E.g., in the case of the South Island, the “03” will be omitted and will therefore prevent a National Call to other areas of the South Island. (for New Zealand users only)
9.6.2 Other options
Changing the base unit PIN (personal identification number)
For security, the base unit PIN must be entered when changing certain settings. The default PIN is “0000”.
Important:
LIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.
1.Press $(centre of joystick).
2.Select u, then press ,.
3.Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it.
4.Select “Other Option”, then press ,.
5.Select “Change Base PIN”, then press
,.
6.Enter the new
7.Enter the new
8.Press {ih}.
Resetting the base unit advanced features to their default settings
The base unit advanced features (page 67 to page 70) can be reset with the cordless handset.
1.Press $(centre of joystick).
2.Select u, then press ,.
3.Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page 80).
4.Select “Other Option”, then press ,.
5.Select “Reset Base”, then press ,.
6.Select “Yes”, then press ,.
7.Press {ih}.
Note:
LThe ECM setting (feature #68 on page 69) will not be reset.
LYou can also reset the base unit advanced features with the base unit (feature #80 on page 70).
80
